ep powder coatingpdf download
-
product description： product description：
ep series of powder coatings are mainly made of high-performance epoxy and polyester for indoor application, which have excellent levelling, decoration, mechanical properties and corrosion resistance.
film appearance & package
appearance effects: smooth surface (all kinds of gloss range), sanding, hammer effect
color: ral colors or according to requirement
packing: 20kgs.carton boxes with double pe-bag.
for more information, please contact us.
physical data
specific gravity：1.2-1.7（depending on the gloss and color）
dry flow ability: 120-160
particle size: 100%＜160μm，according to requirement
substrate & preparation
substrate: aluminum profile, steel or galvanized steel sheet and other metal substrates. (for more information, please contact us).
preparation: the substrate shall be pre-treated according to gb/t9271 or iso 1514. the cold-rolled steel plate tested for salt spray resistance shall be phosphate in addition to gb/t 9217. if the product is applied in high-anticorrosive environment of c4 or above (rated according to iso12944), it can be used with huajia anticorrosive special primer (please consult us).
curing condition （object temperature）
-> can be used such as ir, gas, hot convection drying path, oven and other ways of curing.
-> if use the gas oven to bake, combustion by-products will change the color of the film.
recommended curing condition： object temperature/time 180-190℃/10-15 minutes
application
do not mix this product with others
the substrate must be properly pre-treated before use
manual or automatic electrostatic spraying can be used
the film thickness should be determined according to the geometry and requirement of the coated object, and the performance should be evaluated when the film thickness is less than 60μm
product performance & film properties
properties
test method
criteria
film thickness
iso 2360
60-80um
adhesion
iso 2409
class 0
pencil hardness
iso 15184
≥f
cupping test
iso 1520
≥5mm
bending
iso 1519
≤3mm
salt spray test
iso 9227
pass at 500 hours - no corrosion area more than 2mm from scribe
impact test
iso 6272
≥2.5nm
gb/t 1732
50cm*kg
humidity
iso 6270
pass at 500 hours – no blistering, creep≤2mm
note: 1-all chemical and physical properties are laboratory test results (unless otherwise stated), and are for reference only in application. the performance still needs to depend on the final use environment of the product.
2-the substrate for the above chemical and physical tests is chromate aluminum plates, and all test plates are sprayed with a film thickness of 60 to 80 μm 。
storage stability
store in a cool (≤35℃)、dry warehouse, prevent direct sunlight, and should be isolated from fire source, away from heat source. storage life is 12 months from the date of production. for products with gloss less than 70%, storage life is 6 months@30℃. for special products, please refer to specific product description.
safety precaution
all dusts are respiratory irritants. therefore, inhalation of the dust or of the vapour resulting from the cure should be avoided. take step to prevent skin contact, but should contact occur, wash skin with soap and water. in case of eye contact flush immediately with clean water and seek medical advice. dust and powder should not be allowed to build up on surface or ledge. dust clouds of any finely divided organic material can be ignited with an electric spark or open flame. all equipment should be electrically earthed to prevent build up of static.